Houseworks: Building a handy bench

news

health news Homes
This intermediate level home woodworking project can find a welcome place in most entranceways. Download the free plans and building instructions.  Photo by Roger Yip 
Article content

Every home entrance needs a place to sit and put things down, and that’s why I built this trestle bench for my house. It’s been serving us well for decades, and the design can  work for you, too. If you’d like to try your hand at an intermediate level home woodworking project, this one is certainly worth considering.   

news Sign In or Create an Account

or

Article content

I made mine using 1 7/8”-thick wood, but you can build this design with the more typical 1 1/2” lumber thickness. Begin by rough-cutting wood for the seat, the uprights and the trestle following the dimensions on the plans and instruction package you can download  for free at baileylineroad.com/bench-plans/. If your boards are narrower than the 11 7/8” width needed for the top and uprights, edge-glue enough material to create the width needed, then  cut everything to final length. Wait until later to prepare the grooves in the underside of the seat, the ones that connect with the uprights.  

Article content

Article content

Article content

The most challenging part of building the bench involves preparing two mortises (rectangular holes) in the uprights to accept the tenon on each end of the trestle. You’ll also need to prepare a decorative cutout on the bottom end of each upright. Both these details are made much easier with a technique called pattern routing. It’s a powerful method for quickly and accurately creating precise shapes in wood. How-to details in the download. 

Article content

Next comes the horizontal trestle that supports the legs. The plans show how the top and bottom edges of the trestle are notched. There should be 33 3/4” between the notches when you’re done.   

Article content

The wedges I used to pin the ends of the trestle to the uprights are the same kind I’ve made for a number of projects in my house. Besides being tapered, these wedges also have rounded outer surfaces so they fit just right into holes drilled through the tenons. 

Article content

Temporarily assemble the uprights and trestle, then mark the end of the tenon for drilling 3/4” diameter wedge holes. Locate the centre point of these holes 1/8” in from the outer edges of the uprights, then square up the inside edge of the holes with a chisel.  See plans for details. 

Article content

Article content

Lock the uprights and trestle together with the wedges, then measure the distance between the uprights at their top end. This is the precise distance you need to establish between the grooves in the underside of the seat.  

Article content

Using a tablesaw, create 3/4”-deep grooves to accommodate the top ends of the uprights in the underside of the top. The easiest option is to take multiple crosscutting passes with an ordinary crosscut blade in a table saw, eating away the wood until you’ve got the width of groove you need. If your grooves are just a tiny bit too tight, that’s fine. Rather than trying to widen it with more table saw passes, use a hand plane or sander to take the tiniest bits of wood off the uprights so their fit in the grooves is ideal. 

Article content

Bring all the parts together for one final dry-fit. Sand and adjust until all is perfect, then bring the parts together for final assembly. Glue and clamp the uprights into the dados in the seat, and tap the pegs into the tusk tenons. No need to glue these.  

Article content

When the glue has dried, bore one-inch diameter x two-inch-long dowel holes into the seat and uprights. Cut four pieces of dowel to length, then use a handsaw to create a one-inch-long slot across the centre of each one. Glue the dowels into the holes, then hammer wooden wedges into the slots, with the wedges oriented perpendicular to the grain of the seat.  

Article content

The hand-carved design on the top of the seat is easier to make than it looks, but that’s a topic for another column. 

Article content

Steve Maxwell lives in a house he built on Manitoulin Island, Ontario, that he filled with hand-made furniture. Visit him online at BaileyLineRoad.com for thousands of articles and videos on woodworking, home improvements, renovation and hands-on living.

Article content


Discover more from PMN S.P.O.R.T.S - A PRIME MEDIA NETWORK BRAND

Subscribe to get the latest posts sent to your email.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Captcha verification failed!
CAPTCHA user score failed. Please contact us!

spot_imgspot_imgspot_imgspot_img